Computer Network Lab Work 7
Creating a Dynamic Router Network
Dynamic Routing (Dynamic Router) is routing performed by routers that automatically create data communication paths according to established settings. If there are changes in the network topology, the router will automatically create new routing paths. Dynamic routing operates at the network layer of computer networks within the TCP/IP Protocol Suite. Compared to the advantages and disadvantages of static routing, dynamic routing is preferable for implementation in larger networks. Dynamic routing has several advantages, including:
- It only recognizes addresses that are directly connected to the router (networks under the control of that router).
- There is no need to know all existing network addresses.
- If a new network is added, all routers do not need to be reconfigured; only the relevant routers will reconfigure themselves.
On the other hand, the disadvantages of dynamic routing are as follows:
- The router’s workload increases because it must constantly update the IP table at specific intervals.
- The speed of recognizing and completing the IP table can take a long time, as the router will broadcast to all routers until a matching IP table is found. After the configuration is completed, the router must wait for a while for each router to receive all available IP addresses.
MODULE
All articles on this blog are licensed under CC BY-NC-SA 4.0 unless otherwise stated.
Related Articles
2022-09-16
Computer Network Lab Work 1
Installation of Cisco Packet Tracer and Running Simple SimulationsCisco Packet Tracer is a program provided by Cisco Systems as a simulator for educational purposes, training, and research in computer network simulations. Packet Tracer cannot be used to model active networks, and this simulator also omits some commands that are used on the actual devices, specifically reducing commands found in Cisco IOS. MODULEDownload Module 1
2022-09-23
Computer Network Lab Work 2
Functions of DHCP, DNS, HTTP, FTP, and E-MAIL ServersA server is a provider of various types of data, documents, and other resources needed by clients. Clients require servers to connect within a network or to request data/files that are available on the server. MODULEDownload Module 2
2022-09-26
Computer Network Lab Work 3
Different Class NetworksA network is a collection of computers that are interconnected with or without cables, allowing them to communicate with each other by exchanging data. The purpose of a computer network is to enable more efficient management of resources, as well as to help maintain information in a reliable and up-to-date manner. Networks can also expedite the process of data sharing, facilitate more efficient communication within workgroups, and make efforts to serve clients more...
2022-10-02
Computer Network Lab Work 4
Virtual Local Area Network (VLAN)A Virtual LAN is a group of devices on one or more LANs that are configured (using management software) to communicate as if those devices were connected to the same physical network. A VLAN (virtual LAN) is a network model that logically divides a network into several different VLANs. VLANs are not limited by the physical conditions of the network, as they can be configured virtually without regard to the equipment’s physical setup. Therefore, VLANs offer...
2022-10-10
Computer Network Lab Work 5
Creating an Inter Virtual Local Area Network (VLAN)A Virtual LAN is a group of devices on one or more LANs that are configured (using management software) to communicate as if those devices were connected to the same path, even though they are actually on different LAN segments. For computers on different VLANs to connect, a layer 3 device, such as a router, is required. The router used for VLAN routing must be capable of trunking to the switch. Therefore, the router must have a Fast...
2022-10-17
Computer Network Lab Work 6
Creating a Static Router NetworkPacket Tracer is an application for learning and training, as well as for research in computer network simulation. This program was developed by Cisco Systems and is provided free of charge to faculty, students, and alumni who have participated in the Cisco Networking Academy. The primary goal of Packet Tracer is to provide tools for students and educators to understand the principles of computer networking and to build skills in using Cisco networking...
Comments
