Computer Network Lab Work 12
LAN Cable Assembly: Straight Configuration
Crimping is the process of making a cable usable by attaching connectors to its ends. UTP cables consist of 4 pairs of wires twisted together in pairs.
MODULE
All articles on this blog are licensed under CC BY-NC-SA 4.0 unless otherwise stated.
Related Articles
2022-10-31
Computer Network Lab Work 7
Creating a Dynamic Router NetworkDynamic Routing (Dynamic Router) is routing performed by routers that automatically create data communication paths according to established settings. If there are changes in the network topology, the router will automatically create new routing paths. Dynamic routing operates at the network layer of computer networks within the TCP/IP Protocol Suite. Compared to the advantages and disadvantages of static routing, dynamic routing is preferable for impleme...
2022-11-21
Computer Network Lab Work 10
Security of Access Control ListsAn Access Control List (ACL) is a list of permissions attached to an object. An ACL specifies which users or system processes are granted access to the object, as well as the operations permitted on that object. Each entry in a typical ACL specifies a subject and an operation. Advantages of Using ACLs: Limits network access and improves network performance; for example, ACLs can block video traffic, reducing network load and enhancing overall performance. ACLs...
2022-10-17
Computer Network Lab Work 6
Creating a Static Router NetworkPacket Tracer is an application for learning and training, as well as for research in computer network simulation. This program was developed by Cisco Systems and is provided free of charge to faculty, students, and alumni who have participated in the Cisco Networking Academy. The primary goal of Packet Tracer is to provide tools for students and educators to understand the principles of computer networking and to build skills in using Cisco networking tools. A...
2022-09-16
Computer Network Lab Work 1
Installation of Cisco Packet Tracer and Running Simple SimulationsCisco Packet Tracer is a program provided by Cisco Systems as a simulator for educational purposes, training, and research in computer network simulations. Packet Tracer cannot be used to model active networks, and this simulator also omits some commands that are used on the actual devices, specifically reducing commands found in Cisco IOS. MODULEDownload Module 1
2022-10-10
Computer Network Lab Work 5
Creating an Inter Virtual Local Area Network (VLAN)A Virtual LAN is a group of devices on one or more LANs that are configured (using management software) to communicate as if those devices were connected to the same path, even though they are actually on different LAN segments. For computers on different VLANs to connect, a layer 3 device, such as a router, is required. The router used for VLAN routing must be capable of trunking to the switch. Therefore, the router must have a Fast Ethernet...
2022-10-02
Computer Network Lab Work 4
Virtual Local Area Network (VLAN)A Virtual LAN is a group of devices on one or more LANs that are configured (using management software) to communicate as if those devices were connected to the same physical network. A VLAN (virtual LAN) is a network model that logically divides a network into several different VLANs. VLANs are not limited by the physical conditions of the network, as they can be configured virtually without regard to the equipment's physical setup. Therefore, VLANs offer...
Comments
