Computer Network Lab Work 14
Transfer Data with LAN Cable
Crimping is the process of making a cable usable by attaching connectors to its ends. UTP cables consist of 4 pairs of wires twisted together in pairs.
MODULE
All articles on this blog are licensed under CC BY-NC-SA 4.0 unless otherwise stated.
Related Articles
2022-10-31
Computer Network Lab Work 7
Creating a Dynamic Router NetworkDynamic Routing (Dynamic Router) is routing performed by routers that automatically create data communication paths according to established settings. If there are changes in the network topology, the router will automatically create new routing paths. Dynamic routing operates at the network layer of computer networks within the TCP/IP Protocol Suite. Compared to the advantages and disadvantages of static routing, dynamic routing is preferable for implementati...
2022-10-02
Computer Network Lab Work 4
Virtual Local Area Network (VLAN)A Virtual LAN is a group of devices on one or more LANs that are configured (using management software) to communicate as if those devices were connected to the same physical network. A VLAN (virtual LAN) is a network model that logically divides a network into several different VLANs. VLANs are not limited by the physical conditions of the network, as they can be configured virtually without regard to the equipment’s physical setup. Therefore, VLANs offer fle...
2022-11-21
Computer Network Lab Work 10
Security of Access Control ListsAn Access Control List (ACL) is a list of permissions attached to an object. An ACL specifies which users or system processes are granted access to the object, as well as the operations permitted on that object. Each entry in a typical ACL specifies a subject and an operation. Advantages of Using ACLs: Limits network access and improves network performance; for example, ACLs can block video traffic, reducing network load and enhancing overall performance. ACLs...
2022-10-10
Computer Network Lab Work 5
Creating an Inter Virtual Local Area Network (VLAN)A Virtual LAN is a group of devices on one or more LANs that are configured (using management software) to communicate as if those devices were connected to the same path, even though they are actually on different LAN segments. For computers on different VLANs to connect, a layer 3 device, such as a router, is required. The router used for VLAN routing must be capable of trunking to the switch. Therefore, the router must have a Fast Ethernet...
2022-12-12
Computer Network Lab Work 13
LAN Cable Assembly: Cross ConfigurationCrimping is the process of making a cable usable by attaching connectors to its ends. UTP cables consist of 4 pairs of wires twisted together in pairs. MODULEDownload Module 13
2022-09-26
Computer Network Lab Work 3
Different Class NetworksA network is a collection of computers that are interconnected with or without cables, allowing them to communicate with each other by exchanging data. The purpose of a computer network is to enable more efficient management of resources, as well as to help maintain information in a reliable and up-to-date manner. Networks can also expedite the process of data sharing, facilitate more efficient communication within workgroups, and make efforts to serve clients more eff...
Comments
