Computer Network Lab Work 13
LAN Cable Assembly: Cross Configuration
Crimping is the process of making a cable usable by attaching connectors to its ends. UTP cables consist of 4 pairs of wires twisted together in pairs.
MODULE
All articles on this blog are licensed under CC BY-NC-SA 4.0 unless otherwise stated.
Related Articles
2022-11-14
Computer Network Lab Work 9
Cisco Discovery Protocol ConfigurationCisco Discovery Protocol (CDP) is a useful tool for addressing incomplete or inaccurate networks. CDP is media and protocol independent; it only displays information about connections to directly connected Cisco devices. MODULEDownload Module 9
2022-11-07
Computer Network Lab Work 8
Frame Relay ConfigurationFrame Relay is a WAN protocol that operates at the first and second layers of the OSI model and can be implemented on several types of network interfaces. This protocol is a high-speed communication technology that has been used in thousands of networks worldwide to connect LANs, SNA, the Internet, and even voice applications. Frame Relay is a method of transmitting information over a Wide Area Network (WAN) by dividing the information into frames or packets. Each fra...
2022-12-05
Computer Network Lab Work 12
LAN Cable Assembly: Straight ConfigurationCrimping is the process of making a cable usable by attaching connectors to its ends. UTP cables consist of 4 pairs of wires twisted together in pairs. MODULEDownload Module 12
2022-10-10
Computer Network Lab Work 5
Creating an Inter Virtual Local Area Network (VLAN)A Virtual LAN is a group of devices on one or more LANs that are configured (using management software) to communicate as if those devices were connected to the same path, even though they are actually on different LAN segments. For computers on different VLANs to connect, a layer 3 device, such as a router, is required. The router used for VLAN routing must be capable of trunking to the switch. Therefore, the router must have a Fast Ethernet...
2022-10-17
Computer Network Lab Work 6
Creating a Static Router NetworkPacket Tracer is an application for learning and training, as well as for research in computer network simulation. This program was developed by Cisco Systems and is provided free of charge to faculty, students, and alumni who have participated in the Cisco Networking Academy. The primary goal of Packet Tracer is to provide tools for students and educators to understand the principles of computer networking and to build skills in using Cisco networking tools. A...
2022-10-31
Computer Network Lab Work 7
Creating a Dynamic Router NetworkDynamic Routing (Dynamic Router) is routing performed by routers that automatically create data communication paths according to established settings. If there are changes in the network topology, the router will automatically create new routing paths. Dynamic routing operates at the network layer of computer networks within the TCP/IP Protocol Suite. Compared to the advantages and disadvantages of static routing, dynamic routing is preferable for implementati...
Comments
